Compare Prices

Ph Sensor


Ph Sensor - American Marine PINPOINT pH Probe
American Marine PINPOINT pH

Ph Sensor

PINPOINT pH Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot cable with a high interference suppression jacket and Ag-AgCl reference. American Marine PINPOINT pH Replacement Probe 10 foot cord Ag-Ag/Cl reference Extended life High supression cable jacket

  • Brand: AMERICAN MARINE
  • ASIN: B001EHJO64
  • UPC: 019022445119
Ph Sensor - SainSmart Liquid PH Value Detection Detect Sensor Module PH Value Monitoring Control for arduino
SainSmart Liquid PH Value Detection Detect Sensor Module PH Value Monitoring Control for

Ph Sensor

Heating voltage: 5±0.2V (AC -• DC) Working current: 5-10mA The detection concentration range: PH0-14 The detection range of temperature: 0-80 centigrade The response time: ≤ 5S Stability time: ≤ 60S Power consumption: ≤ 0.5W The working temperature: -10~50 centigrade (the nominal temperature 20 centigrade) Working humidity: 95%RH (nominal humidity 65%RH) Service life: 3 years Size: 42mm x 32mm x 20mm Weight: 25g The output: analog voltage signal output Package Included: 1 x Liquid PH Value Detection detect Sensor Module Monitoring Control For arduino

  • Brand: SainSmart
  • ASIN: B01H5ACLKO
Ph Sensor - Atlas Scientific EZO pH Circuit - Work with off the Shelf pH Probe, Sensor & Electrode - Designed for Arduino - Calibrate and Read pH with Probe - Full Range pH Reading from .001 – 14.000
Atlas Scientific EZO pH Circuit - Work with off the Shelf pH Probe, Sensor & Electrode - Designed for Arduino - Calibrate and Read pH with Probe - Full Range

Ph Sensor

Atlas Scientific EZO pH Circuit - Work with Atlas Scientific pH Probe, off the Shelf pH Probes, Sensors & Electrodes - Designed for Arduino - Calibrate and Read pH with Probe Atlas Scientific is the industry leader in embedded chemical sensing. This highly specialized company focuses all of its resources on manufacturing the best chemical sensors and test chemicals on the market today. Features The EZO pH Circuit, is a small footprint computer system that is specifically designed to be used in robotics applications where the embedded systems engineer requires accurate and precise measurements of pH. A highly compact pH monitoring system that fits into any breadboard, this design configuration allows the user to accurately monitor pH without any additional circuitry or components. The pH-Stamp/Circuit provides scientific grade readings to any embedded system that has an RS232 connection interface (voltage swing 0-VCC, not +/- 12 volts). Data format is ASCII and communication with the pH-Stamp is done using only 11 simple commands. pH Circuit works with all off-the-shelf pH probes (though it requires only annual calibration with Atlas Scientific probe) and is compatible with any microprocessor that supports UART or I2C protocol. This EZO class embedded pH Circuit offers the highe...

  • Color: red
  • Brand: Atlas Scientific
  • ASIN: B00641R1PQ
  • UPC: 798304184037
Ph Sensor - Analog pH Sensor / Meter Kit For Arduino/Use It For Your Aquaponics Or Fish Tanks Or Other Materials That Need Measurements.
Analog pH Sensor / Meter Kit For Arduino/Use It For Your Aquaponics Or Fish Tanks Or Other Materials That Need

Ph Sensor

Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃). For most hobbyist this great accuracy range and it's low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.Build your own PH meter gadjet, or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your aquaponics or fish tanks or other materials that need measurements. APPLICATIONSWater quality testingAquacultureSHIPPING LISTpH probe (BNC connector) x1pH sensor circuit board x1Analog cable x1

  • Brand: D&F
  • ASIN: B01D04C9XI
  • UPC: 605757691183
Ph Sensor - Soil pH Meter, Jellas 3 in 1 Soil Moisture Meter / PH / Sunlight Tester / Plant Moisture Meter / Soil Test Kits for Garden, Farm, Lawn, Indoor & Outdoor (Green)
Soil pH Meter, Jellas 3 in 1 Soil Moisture Meter / PH / Sunlight Tester / Plant Moisture Meter / Soil Test Kits for Garden, Farm, Lawn, Indoor & Outdoor

Ph Sensor

Jellas 3-in-1 Soil pH/ Light/ Moisture Meter --- Do you like plants? --- Do you want to take care of plants? --- If you're plant lover, Jellas 3-in-1 soil pH meter is your best choice! No battery, simple operation, accurate reading, what are you waiting for! FEATURES ►This meter is design for your plants, to let you know the condition of your plants,care of its health. ►You can test the soil conditions of fruits(for watermelon), flowers( for African Violet, Succulent), vegetables, shrubs, etc. ►You don't need to worry about if need to watering, too acidic or alkaline. Color: Green Probe length: 7.0 inches Distance between probes: 0.6 inch Copper probe diameter: 5 mm Aluminum probe diameter: 5 mm Shape: Round Product Size: 10.2 x 2.0 x 1.2 inches Package weight: 2 oz/56g INSTRUCTION Step 1: Switch moisture/pH/light position. Step 2: Stick the probe into the soil about 2-4 inches. Step 3: Adjust the position of the probe until the pointer on the dial swing slightly. Step 4: After 10 minutes, Note moisture/pH/light level in the dial. Step 5: Remove probe from soil and wipe clean after each use. WARM TIPS ★Don't touch the stone or hard rock soil, it's easy to damage the probes if the soil is too hard and dry. ★Do not use it to test pure water or other liquid, electrolytic ...

  • Color: Green
  • Brand: Jellas
  • ASIN: B078JLG1GQ
Ph Sensor - Soil pH Meter, Jellas 3-in-1 Moisture Sensor Meter / Sunlight / pH Soil Test Kits test function for Home and Garden, Plants, Farm, Indoor/Outdoor Use.
Soil pH Meter, Jellas 3-in-1 Moisture Sensor Meter / Sunlight / pH Soil Test Kits test function for Home and Garden, Plants, Farm, Indoor/Outdoor

Ph Sensor

This 3 in 1 soil moisture meter is designed to better know the condition of your plant, monitor the soil moisture, help you control the soil ph acidity and see if plant gets sufficient sunlight to make plants grow healthier. Specifications: Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet). Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh). pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline). Product Size: 11.2 x 2.0 x 1.3 inches. Probe length: 7.9 inches. Distance between probes: 0.5 inch. Copper probe diameter: 5 mm. Aluminum probe diameter: 5 mm. Color: Green Package weight: 2 oz. 56g 13*4*1.7 in How to use: Step 1: toggle switch to moisture /pH/light position. Step 2: Stick the probe into the soil about 2-4 inches. Step 3: Adjust the position of the probe until the pointer on the dial swing slightly. Step 4: After 10 minutes, read the moisture/pH/light level in the dial. Step 5: Remove probe from soil and wipe clean after each use. Please Note: 1. Do not insert into very hard soil or touch hard objects when you insert it in the soil. 2. Do not use it to test pure water or other liquid, electrolytic response index will be affected, it can only be used to measure the soil. 3. Please wipe and clean the probe after each suing.

  • Color: 3-in-1 Soil pH Meter
  • Brand: Jellas
  • ASIN: B075GHNNC7
Ph Sensor - Analog pH Meter Kit
Analog pH Meter Kit

Ph Sensor

Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃). For most hobbyist this great accuracy range and it's low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage. Build your own PH meter gadjet, or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your aquaponics or fish tanks or other materials that need measurements. Note: Buffer solutions are not included. Specifications: Module Power : 5.00V Module Size : 43 x 32mm Measuring Range :0 - 14PH Measuring Temperature: 0 - 60 ℃ Accuracy : ± 0.1pH (25 ℃) Response Time : ≤...

  • Brand: DFROBOT
  • ASIN: B01BNG41KO
  • UPC: 608819144894
Ph Sensor - Liquid PH0-14 Value Sensor Module + BNC PH Electrode Probe for Arduino
Liquid PH0-14 Value Sensor Module + BNC PH Electrode Probe for

Ph Sensor

Heating voltage: 5 ± 0.2V (AC · DC) Working current: 5-10mA Detectable concentration range: PH0-14 Detection Temperature range: 0-80 ℃ Response time: ≤5S Settling Time: ≤60S Component Power: ≤0.5W Working temperature: -10 ~ 50 ℃ (nominal temperature 20 ℃) Humidity: 95% RH (nominal humidity 65% RH) Module Size: 42mm × 32mm × 20mm Output: analog voltage signal output With 4pcs M3 Mounting Holes Package include: 1pcs Liquid PH0-14 Value Detect Test Sensor Module with AT for Arduino 1pcs PH Electrode Probe Hydroponic Sensor BNC Interface

  • Brand: Balance World Inc
  • ASIN: B01LWLHPRR
Ph Sensor - Soil pH Meter, Jellas 3-in-1 Moisture Sensor Meter/Light/pH Soil Test Kits, Plant Moisture Meter for Garden, Farm, Lawn, Indoor & Outdoor Use. (Silver)
Soil pH Meter, Jellas 3-in-1 Moisture Sensor Meter/Light/pH Soil Test Kits, Plant Moisture Meter for Garden, Farm, Lawn, Indoor & Outdoor Use.

Ph Sensor

Jellas 3-in-1 Soil pH/Moisture Meter The 3-in-1 moisture meter is design for your plants, to let you know the condition of your plants,care of its health. You can test the soil conditions of fruits(for watermelon), flowers(for African Violet),vegetables, shrubs,etc. You don't need to worry about if need to watering, too acidic or alkaline. Just buy it---a must have household! Specifications: Moisture Range:1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet). Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh). pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline). Product Size: 10.2 x 2.0 x 1.2 inches. Probe length: 7.0 inches. Distance between probes: 0.4 inch. Copper probe diameter: 5 mm. Aluminum probe diameter: 5 mm. Color: Silver Shape: Round Package weight: 2 oz/56g; 13*3*0.8 in INSTRUCTION Step 1: Switch moisture/pH/light position. Step 2: Stick the probe into the soil about 2-4 inches. Step 3: Adjust the position of the probe until the pointer on the dial swing slightly. Step 4: After 10 minutes, Note moisture/pH/light level in the dial. Step 5: Remove probe from soil and wipe clean after each use. Important Notes: ▼Please note do not touch the stone or hard rock soil, It's easy to damage the probes if the soil is too hard and dry. ▼Do not use it to test pure wa...

  • Color: Jellas Soil PH Meter
  • Brand: Jellas
  • ASIN: B077YKRYPN
Ph Sensor - KOOKYE 16 in 1 Smart Home Sensor Modules Kit for Arduino Raspberry Pi DIY Professional (Smart Home Kit)
KOOKYE 16 in 1 Smart Home Sensor Modules Kit for Arduino Raspberry Pi DIY Professional (Smart Home

Ph Sensor

This is an excellent collection of sensors and components to use with Arduino and Raspberry Pi. It was specially designed for smart home. It comes with 16 sensor modules and female to female jumper wires, everything was properly identified and individually packed in plastic box. No matter where you are,the smart home sensor kit combined with arduino or Raspberry let you to control, monitor and secure your home. We provide detailed instruction containing 16 projects with description and sample code. Please go to KOOKYE office website: http://kookye.com/?p=1573 Packing list: 1x Voltage sensor 1x MQ2 smoke sensor 1x MQ5 coalgas sensor 1x MQ7 carbon monoxide sensor 1x DS18B20 temperature sensor 1x DHT11 temperature humidity sensor 1x Flame detection sensor 1x Water level sensor module 1x Digital touch sensor module 1x Vibration sensor module 1x Sound sensor module 1x Photosensitive sensor module 1x Passive buzzer module 1x BMP180 digital air pressure sensor 1x HC-SR501 infrared sensor module 1x Two-way relay module 1x jumper wires 20cm

  • Brand: KOOKYE
  • ASIN: B01J9GD3DG
  • UPC: 763684330039

Ph Sensor Video Results

Potentiometric pH measurement

Ph Sensor

The pH-value of a liquid can be calculated using the potentiometric measurement principle. This video shows what it is about and how this measuring principle works. http://www.products.endress.com/ph

  • Likes: 1415
  • View count: 244082
  • Dislikes: 39
  • Comments: 57
Tags: pH sensor,pH electrode,potentiometric principle,pH measurement,hydrogen ion,pH scale,pH neutral,p...

PH SENSOR

Ph Sensor

this is how we connect our ph sensor with arduino.The result will appear in serial monitor

  • Likes: 45
  • View count: 22052
  • Dislikes: 26
  • Comments: 75
Tags:

How a pH meter works!

Ph Sensor

You will learn how your pH electrode works. In order to have accurate results it is important to understand the tool you are working with. Digital pH meters with electrodes have a flow of electricity that no one knows about. Welcome to understanding pH

  • Likes: 145
  • View count: 23826
  • Dislikes: 8
  • Comments: 7
Tags: pH,pH meter,hydroponics,wine making,pH professor,hydrated gel layer,digital pH

Cara Menggunakan Sensor PH Meter (SKU: SEN0161) Dengan Arduino

Ph Sensor

Cara Menggunakan Sensor PH Meter (SKU: SEN0161) Dengan Arduino

  • Likes: 38
  • View count: 7948
  • Dislikes: 4
  • Comments: 240
Tags: cara menggunkan,ph meter,sen0161,arduino,sensor


Ph Sensor V4908 Search Results

Looking for more Ph Sensor similar ideas? Try to explore these searches: 6 Pack Wine, Bistro Garden Furniture Set, and 2007 Ford Mustang Body Kit.

Globel-is.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com